Question 1

Do these use proprietary brake pads that are only available from you, or are replacements available from a local auto parts store? View answer

Asked 3 ´years ago | 2 Port USB Round Socket for Custom Mount

Question 2

Does the dash pad cover for the 78 full size bronco come with an adhesive to install it? View answer

Asked 1 ´year ago | Black Dash Pad Cover | 78-79 Bronco, 73-79 Ford Truck

Question 3

Does this have holes for gas tanks? View answer

Asked 1 ´year ago | Uncut Lower Outer Quarter Panel | LH Driver | 66-76 Ford Bronco

Question 4

Do I still need the steering shock with this conversion? View answer

Asked 4 ´years ago | Power Steering Conversion Kit | Quick Ratio | 66-77 Ford Bronco

Question 5

I tried another led in my dash but they don't seem dimmable? Is this a problem with leds? View answer

Asked 3 ´years ago | LED Dash Instrument Cluster Lights, 66-77 Ford Bronco

Question 6

Will the trac bar riser interfere with the bump stop or heavy duty spring cups? Also, what is the max amount of rise that it provides? View answer

Asked 4 ´years ago | Speedometer Cable | OE Type, 72.5 inch | 66-77 Bronco, 57-72 Ford Truck

Question 7

What is the rotor diameter? View answer

Asked 1 ´year ago | Disc Brake Hub + Rotor Assembly | OE or Disc Kit | 66-86 Bronco, 76-86 Ford Truck

Question 8

Does this module include a back up light LED. View answer

Asked 6 ´years ago | LED Tail Light System, 66-77 Ford Bronco

Question 9

Can I use this setup w a Coyote motor? View answer

Asked 1 ´year ago | WH Frame Mounted High Pressure EFI Fuel Delivery Kit | 66-77 Ford Bronco

Question 10

How do I order both driver & passenger side mirrors as I only see 1 part #?<br>What are the mounting dimensions? I have a '67 and want to know if this fits my existing mount holes?<br>Thanks,<br>David View answer

Asked 4 ´years ago | Door Side Mirror | Silver Satin | 68-79 Bronco, 67-79 Ford Truck

Question 11

Will this work on my 77 Bronco with 302, auto, and factory distributor? Which of your other coils will work form my 77? Thanks. View answer

Asked 1 ´year ago | PerTronix Flame Thrower HV Ignition Coil | E Core | 60K Volt

Question 12

I would like to use the rear family cage without any other roll bars in order to support a safari top. Will this rear cage stand alone for that purpose? View answer

Asked 6 ´years ago | Steel Tilt Steering Column | Automatic Column Shifter, 2.25 inch OD | Universal

Question 13

Are the clip attachments holes in the same location as factory emblems? I don't want to dril new holes if I don't have too. View answer

Asked 6 ´years ago | Bronco Sport Script Fender Emblem + Clips | Black | 67-77 Ford Bronco

Question 14

Do you have to convert to twin shifters for the T shifter? View answer

Asked 2 ´years ago | AX15 Transmission Deluxe Kit (w/New Trans), T-Shift Dana 20, 66-72 Bronco

Question 15

Does this lift kit fit a 1966 Bronco View answer

Asked 2 ´years ago | Early Bronco 2.5-inch Suspension Lift w/Rancho 9000XL Shocks | System 3

Question 16

I'm on add a leafs/blocks now. I've already drilled my perches to move my axle back 1. Do these full leafs move the rear axles back any? I could use another 1 View answer

Asked 1 ´year ago | ARB Compact Air Compressor

Question 17

Can you get these in parchment color? (So I can dye them to match my seats?) View answer

Asked 4 ´years ago | Door Side Mirror | Chrome, Convex Glass | 1967 Ford Bronco

Question 18

Does the vent windows come with glass? Is the door glass tinted the same as the aftermarket windshields? View answer

Asked 4 ´years ago | Master Door Parts Kit - No Door Shells | Driver & Passenger | 68-77 Ford Bronco

Question 19

Who is the manufacturer? View answer

Asked 1 ´year ago | Flared Lower Outer Quarter Panel | LH Driver | 66-76 Ford Bronco

Question 20

Is the main difference between the Deluxe (7221NET) and the 7220NET kit, that the deluxe comes with the clutch plate in addition? View answer

Asked 4 ´years ago | AX15 Transmission Deluxe Kit (w/New Trans), T-Shift Dana 20, 66-72 Bronco

Question 21

There are very small holes, maybe 1/16th in the rubber and hardtop, what is used to hold this in those holes? Red interior book makes it seem like plastic push fastener, none exist that small anymore. View answer

Asked 4 ´years ago | Windshield Frame to Hard Top Seal | 66-77 Ford Bronco

Question 22

Do I need to drill holes for the wires to come out of the door and into these straps? If so, where is the best place drill the holes? View answer

Asked 5 ´years ago | Custom Door Straps for Speaker & Power Windows Wires | 66-77 Ford Bronco

Question 23

my 76 bronco manual shift on the column has this type of shift linkage retainer, looks like it was installed from the factory, does it also need the item# 8388 shift linkage retainer clip installed on the rod? View answer

Asked 3 ´years ago | C4 Automatic Shift Linkage Retainer Bushing | 73-77 Bronco, 73-93 Ford Truck

Question 24

It is my understanding that Bronco's went with a Spicer yoke in 1970. Is a Spicer yoke required for install? or will the older yokes work just as well? View answer

Asked 3 ´years ago | HD Front Driveshaft | 66-77 Ford Bronco - Made in USA

Question 25

What is the outside dimension of the flange View answer

Asked 5 ´years ago | Steering Column Firewall Boot Seal | 2 inch, Tilt Column | 66-77 Ford Bronco

Question 26

Can you tell me which are the matching rear quarter deluxe panels 68-77 black on black. I can find nothing with the same description to match the door panels. Thx, james View answer

Asked 2 ´years ago | 1/4 inch Wheel Spacer | Each | Fits 5x5.5 & 6x5.5 Bolt Patterns

Question 27

Do your stock door hinges, #6498, come with satin black powder coating or standard satin black paint? View answer

Asked 1 ´year ago | Door Hinges | OE Type, Set of Four | 66-77 Ford Bronco

Question 28

Do you sell just the oil pickup tube? Or can you give me the brand and part #of this pickup tube? View answer

Asked 3 ´years ago | Engine Oil Pan Kit + Stainless Dip Stick & Tube | SBF 289 302 V8 | 66-77 Ford Bronco

Question 29

I have a 79 F150 ranger lariat, automatic, V8 (4x4) with dual front shocks. I understand that I would need 2 more shocks, but will this work on my vehicle? View answer

Asked 3 ´years ago | Stock Height Suspension | Bilstein 5100 Shocks | 66-77 Ford Bronco

Question 30

When you want to take your hardtop off, do you have to cut the seals as one side attaches to and stays with the windshield? View answer

Asked 5 ´years ago | Upper Door Seals | Pair | 66-77 Ford Bronco

Question 31

Are they sold as a pair or each? View answer

Asked 3 ´years ago | Front Turn Signal Assembly with Amber Lens | 69-77 Ford Bronco

Question 32

Can you get these in black? View answer

Asked 6 ´years ago | Billet Headlight Rings | Pair | 66-77 Ford Bronco

Question 33

Can you use the stock Bronco style steering wheel? View answer

Asked 4 ´years ago | Tilt Steering Column Kit for Floor Shifter | Custom Built

Question 34

Is this a two part cover, so it will fit after column is installed? View answer

Asked 3 ´years ago | High Tech Throttle Spring Kit, Holley 4-Barrel

Question 35

Will this twin stick shifter work with a 2" body lift? View answer

Asked 2 ´years ago | Dana 20 Twin Stick Transfer Case Shifter Kit | Stock T Shift | 66-72 Ford Bronco

Question 36

Are they sold as a pair? View answer

Asked 4 ´years ago | Liftgate Latch Access Cover | Each | 66-69 Ford Bronco

Question 37

Is the larger weld on motor mount for the left or right side 351W View answer

Asked 3 ´years ago | V8 Motor Mount Towers | Stamped, Weld On Frame | 66-77 Ford Bronco

Question 38

Does Bezel come with hardware ( Screws) ? View answer

Asked 1 ´year ago | Billet Instrument Cluster Bezel | 66-77 Ford Bronco

Question 39

How do you use the set tape on the window. Just u shape in channel and put glass in??? View answer

Asked 4 ´years ago | Window Glass Setting Tape | Does Both Doors | 66-89 Bronco, 48-89 Ford Truck

Question 40

What is the Material Thickness, or Gauge, is the Extreme Duty Truss made of? View answer

Asked 5 ´years ago | Ford 9 inch Axle Truss | Extreme Duty | 77-79 Ford Bronco

Question 41

Which flywheel do I run with this kit?. I have an early 302, 28 oz. Thx View answer

Asked 5 ´years ago | Centerforce II Clutch Disc + Pressure Plate | NV4500 NV3550 AX15 TR4050

Question 42

Is the price of $269.99 per panel or is it for the pair of panels? View answer

Asked 2 ´years ago | MOAB Upgrade for HydroBoost | Left Side Drop

Question 43

Does this kit come with the 12 tabs to hold this in place? View answer

Asked 2 ´years ago | Cowl Lace Seal Kit | 66-77 Ford Bronco

Question 44

Will this bar work with reclining seats? View answer

Asked 6 ´years ago | Chrome Tilt Steering Column | Automatic Column Shifter, 2.25 inch OD | Universal

Question 45

Where do the flat oval bumpers go? View answer

Asked 3 ´years ago | Door Hinge Shim Kit | Stainless, Does 1 Hinge | 66-77 Ford Bronco

Question 46

need to replace the fuel gauge cluster and temp cluster. is there any additional connector part i need? View answer

Asked 9 ´months ago | Fuel Gauge | OE Type for Stock Cluster | 66-77 Bronco, 61-66 Ford Truck

Question 47

I have a 93 f150 with a 4.9l straight six and AC. I really want to add a saginaw pump setup and was curious if this would work since the truck uses the exact same pump as the one this helps convert. View answer

Asked 5 ´years ago | Power Steering Pump Brackets | 351M 400M | 78-79 Bronco, 77-79 Ford Truck

Question 48

are these rubber or poly? View answer

Asked 10 ´months ago | Tailgate Upper & Lower Bumpers | 4 piece | 66-77 Bronco, 61-72 Ford Truck

Question 49

Does this gasket have integrated sealant on both sides of the steel?<br>Thanks! View answer

Asked 2 ´years ago | Steel Core Ford 9-inch Third Member Housing Gasket

Question 50

Is this part a spicer equivalent of the 620257 or 620216? I have a 79' Dana 44 from a Ford F-150. I believe I need the 620257 one, as it is larger. Thanks View answer

Asked 4 ´years ago | Dana 44 Inner Axle Seal | 71-77 Bronco, 75-79 Ford Truck

Browse by Topic