Question 1

Will this fit my f100 1977? Doing a coyote swap with 6r80 automatic transmission View answer

Asked 2 ´years ago | Lokar 6R80 Automatic Electronic Sport Mode Shifter

Question 2

What is the thread pattern on the front and rear twin shift knobs? View answer

Asked 2 ´years ago | WH Black Shifter Knob | Multiple Thread & Shift Pattern Options

Question 3

what gauge metal is used for this panel? ? View answer

Asked 5 ´years ago | Seamless Flared Quarter Panel | RH Passenger | 66-76 Ford Bronco

Question 4

I would like to order this kit in black powdered finish but I don't see a option for this on the page. View answer

Asked 5 ´years ago | Dana 20 Twin Stick Transfer Case Shifter Kit | Stock J-Shift | 73-77 Ford Bronco

Question 5

Have a 76 with Full width reverse Dana 44. Will this kit work? Do you have options for my setup? Thanks. View answer

Asked 2 ´years ago | Dana 20 Transfer Case Adapter | Ford C6 Automatic | 66-77 Ford Bronco

Question 6

Can these be used with lift off door hinges which leave the body side of the hinge in the door jam? View answer

Asked 4 ´years ago | Fiberglass Door Inserts | One-piece Design | 66-77 Ford Bronco

Question 7

Is this the front or rear bumper? I need both. View answer

Asked 1 ´year ago | Armor Plate Bumper | Front or Rear | 66-77 Ford Bronco

Question 8

What color green is this? I have a boxwood green Bronco I'm trying to match View answer

Asked 5 ´years ago | Classic Instruments Gauge Cluster | Gray | 66-77 Bronco, 61-66 Ford Truck

Question 9

I have your Sport Custom Cage will this work as an add on for my current roll cage? View answer

Asked 2 ´years ago | Steel Tilt Steering Column | Automatic Column Shifter, 2.25-inch OD | Universal

Question 10

What is the diameter of this pulley? View answer

Asked 3 ´years ago | Steel Power Steering Pump Serpentine Pulley

Question 11

I have a 1969 Bronco with speaker vents in the dash but no holes for mounting a speaker. Will this require that I drill holes in dash? View answer

Asked 2 ´years ago | RetroSound In-Dash Speaker | 68-77 Ford Bronco

Question 12

Is this bracket all steel? Also, how thick is the material on the front plate (where the pump mounts) and the reinforcing rib across the top? View answer

Asked 7 ´months ago | Tri-Pass Radiator | 3-Core, Copper/Brass, Trans Cooler | SBF V8 | 66-77 Ford Bronco

Question 13

Do you offer the ididit dimmer kit lever as an option? View answer

Asked 1 ´year ago | Tilt Steering Column Kit for Floor Shifter | Custom Built

Question 14

Bought this to switch back to factory style linkage from a cable. Found that my gas pedal does not have the ball stud needed to connect this linkage to the gas pedal assembly. Can you please advice on size of ball stud needed to fit this linage and pedal assembly? View answer

Asked 9 ´months ago | Throttle Linkage Kit | SBF 289 302 351W V8 | 66-77 Ford Bronco

Question 15

What wiper motor goes with the linkage? View answer

Asked 4 ´years ago | Windshield Wiper Linkage | 69-77 Ford Bronco

Question 16

Will this work on a 1977 Highboy F250 4x4 front axle? View answer

Asked 2 ´years ago | Spindle Removal Tool | 66-96 Bronco, 76-96 Ford Truck

Question 17

What exactly is the potential compatibility issue with this pulley set? The current engine and pulleys on my 72 302 are original, but the harmonic balancer is not. View answer

Asked 3 ´years ago | Early Bronco Body Tub Kit w/Uncut Quarters | Freight Included

Question 18

How is the panel actually attached to door? View answer

Asked 1 ´year ago | Dana 20 Twin Stick Transfer Case Shifter | AX15 TR4050 | 66-77 Ford Bronco

Question 19

Do you carry, or plan to carry the earlier (1966, etc.) version of door panels in this style? View answer

Asked 3 ´years ago | Carbon Fiber Look Door Panels + Arm Rests & Door Cups | 68-77 Ford Bronco

Question 20

is this a set of two mats for the front? Are rear mats available? View answer

Asked 8 ´months ago | Dash Panel Overlay | Blank | 66-77 Ford Bronco

Question 21

Is the tuning software for the Pro-Flo 4 compatible with An Apple IOS iPhone or iPad or is it limited to Android based devices? View answer

Asked 2 ´years ago | Edelbrock Black Plasma Pro-Flo 4 EFI Fuel Injection Kit | SBF 289 302 | 35930-BP

Question 22

What are the dimensions of the bezel? View answer

Asked 5 ´years ago | Transfer Case Boot + Stainless Bezel | OEM J-Shifter | 73-77 Ford Bronco

Question 23

How wide are the belts? View answer

Asked 2 ´years ago | Black Inside Door Handle | LH Driver | 68-77 Bronco, 68-72 Ford Truck

Question 24

will this work with FiTech and 6R80? View answer

Asked 2 ´years ago | Dakota Digital RTX Dash | OE-Look | 66-77 Bronco, 61-66 Ford Truck

Question 25

I can't get the lower joint seated fully on the steering box. Can get it about half way on. Is this correct? Don't want to hit it with anything that could damage box... View answer

Asked 5 ´years ago | Collapsible Lower Steering Shaft | Custom Built | 66-77 Ford Bronco

Question 26

What is the natural finish on these? Is it smooth or textured? View answer

Asked 1 ´year ago | WH Gorilla Warflares Fender Flares | Front ONLY | 66-77 Ford Bronco

Question 27

What's the flange bolt pattern, early big bearing 11 drum or late/Torino big bearing? View answer

Asked 4 ´years ago | Super 9 Ford 9-inch Housing | Large Bearing | 66-77 Ford Bronco

Question 28

Does this setup fit under a stock hood without a hood scoop and no body lift?? (73 Bronco 302) View answer

Asked 3 ´years ago | Edelbrock Black Plasma Pro-Flo 4 EFI Fuel Injection Kit | SBF 289 302 | 35930-BP

Question 29

In reading the answer to a previous question, it sounds like the included fuel pump runs at 90 psi. But the Edelbrock Pro-Flo 4 system requires 43-45 or 58-60 psi. Is the included fuel pump pressure adjustable, or, is there an option to order the M1A1 tank with a fuel pump that is compatible with the PF4 system to avoid using a fuel pressure regulator? View answer

Asked 4 ´years ago | M1A1 Stainless 23 Gallon EFI Fuel Tank + Skid Plate | In-tank Pump | 66-77 Bronco

Question 30

Will this fit my f100 1977? Doing a coyote swap with 6r80 automatic transmission View answer

Asked 5 ´years ago | Lokar 6R80 Automatic Electronic Sport Mode Shifter

Question 31

What bulb base do these have, or take? View answer

Asked 1 ´year ago | Front Turn Signal Assembly w/Clear Lens | 66-68 Ford Bronco

Question 32

I am piecing together a 2-1/2 front suspension for my '71(basically the front half of item# 0116BL2.5N). I am wanting to use the extended shock bracket item# 1455 and Bilstein shocks. Which eye/eye shock do I need. Thank you View answer

Asked 1 ´year ago | ARB 4X4 > Bilstein 5100 Series Shock | Eye to Eye | 22.5-in Extended, 14-in Collapsed

Question 33

How long is the Clutch Fork Push Rod Item #: 8163? thanks View answer

Asked 3 ´years ago | 80-96 Ford Bronco & Truck Auxiliary Lights > Clutch Fork Push Rod | 66-77 Bronco, 65-72 Ford Truck

Question 34

Can you adjust the height to tuck it up high like the Sherman? View answer

Asked 4 ´years ago | M1A1 Stainless 23-gallon Fuel Tank + Skid Plate | 66-77 Ford Bronco

Question 35

Will these clean better than my stock Sasquatch fender flares?. Mud seems to stain them. Are these a smooth finish? View answer

Asked 1 ´year ago | Air Design Wide Fender Flares, 4-Door, 21-24 Ford Bronco - VM2DZ-16268-A - FO34E11

Question 36

Are the hinges stainless steel? View answer

Asked 2 ´years ago | Hard Top Liftgate with Hinges | 70-77 Ford Bronco

Question 37

What is the difference between this headlight and the Evolution speaker headlight besides the big price difference? View answer

Asked 1 ´year ago | Revolution LED Headlights | Black, 7' Round | 66-78 Bronco, 48-78 Ford Truck

Question 38

What is the length of the cables? View answer

Asked 5 ´years ago | Tailgate Cable Set | Silencing, PAIR | 66-77 Bronco, 64-79 Ford Truck

Question 39

Have 66 bronco hard top, will this fit it? Can't seem to find the latches for the interior mechanism for mine View answer

Asked 3 ´years ago | Hard Top Liftgate with Hinges | 70-77 Ford Bronco

Question 40

can you get in black View answer

Asked 5 ´years ago | Dual Return Power Steering Pump Remote Reservoir + Hoses

Question 41

Will the dip stick tube fit with shorty headers? View answer

Asked 3 ´years ago | Engine Oil Pan Kit + Stainless Dip Stick & Tube | SBF 289 302 V8 | 66-77 Ford Bronco

Question 42

Will this bearing fit on the 31 spline Axle shaft? View answer

Asked 3 ´years ago | Small Rear Axle Bearing | Premium | 66-75 Ford Bronco

Question 43

Like it, except don't want the tach. Is there a version available w/o that? View answer

Asked 5 ´years ago | Classic Instruments Gauge Cluster | OE-Look | 66-77 Bronco, 61-66 Ford Truck

Question 44

Will these bushings fit spindles/axles for a 78 f250 D44? View answer

Asked 2 ´years ago | Extreme Dana 30/44 Spindle Bushings | PAIR | 66-79 Ford Bronco

Question 45

Can an LED bulb be used, if so which one? View answer

Asked 3 ´years ago | H4 Headlight Conversion Kit w/Night Lighter Harness, 66-77 Ford Bronco

Question 46

is the passenger side mirror convex View answer

Asked 4 ´years ago | Door Side Mirrors + Outer Door Handles Set | OE Chrome | 68-77 Ford Bronco

Question 47

What is the Pump Pressure (PSI and GPM) Flow Rate of the SAGINAW/DELPHI STEERING PUMP KIT Item #:792030KIT? Thanks View answer

Asked 11 ´months ago | Power Steering Pump | 351M 400M | 78-82 Bronco, 77-82 Ford Truck

Question 48

Does this turn signal switch fit a tilt wheel or non tilt wheel? View answer

Asked 3 ´years ago | Cowl Side Extension Panel Kit | 4-piece | 66-77 Ford Bronco

Question 49

What are the dimensions of the bezel? View answer

Asked 4 ´years ago | Transfer Case Boot + Stainless Bezel | OEM J-Shifter | 73-77 Ford Bronco

Question 50

Will this vented gas cap fit both the Main Tank and Auxiliary Tank filler necks on a 1972 Bronco? View answer

Asked 4 ´years ago | Vented Gas Cap | Long Reach, 2.80 inch OD | 71-76 Bronco, 73-76 Ford Truck

Browse by Topic