Question 1

Is this flange the same as the D8TZ-3A528-A flange that was used on 1978-79 F150's and Broncos with 2WD automatic trans and tilt column? View answer

Asked 1 ´year ago | Adjustable Hood Front Bumpers | Stainless, PAIR | 66-77 Ford Bronco

Question 2

What is the width of the tape? View answer

Asked 10 ´months ago | Window Glass Setting Tape | Does Both Doors | 66-89 Bronco, 48-89 Ford Truck

Question 3

Currently using a Fitech EFI, many issues! Will the Command Center high pressure fuel pump work with the Edlebrock EFI system? View answer

Asked 5 ´years ago | Edelbrock Pro-Flo 4 EFI Fuel Injection Kit | Ford 351W | 35950

Question 4

What size are the ports on these gaskets? View answer

Asked 1 ´year ago | Edelbrock Intake Manifold Gaskets | SBF Ford 260 289 302 351W

Question 5

How do you recommend installing the upper insulating panel with foil backing? Glue I would assume. Does the foil glue to the metal or the insulation. I don't have one for reference. What glue works best for this? thanks for your help. View answer

Asked 4 ´years ago | Front Fender Brace + Clips | OE-Type, Stainless | 67-77 Ford Bronco

Question 6

Do these use proprietary brake pads that are only available from you, or are replacements available from a local auto parts store? View answer

Asked 3 ´years ago | 2-Port USB Round Socket for Custom Mount

Question 7

Can you tell me which are the matching rear quarter deluxe panels 68-77 black on black. I can find nothing with the same description to match the door panels. Thx, james View answer

Asked 2 ´years ago | 1/4 inch Wheel Spacer | SINGLE | Fits 5x5.5 & 6x5.5 Bolt Patterns

Question 8

can I get these in parchment for a 1968 Bronco? View answer

Asked 3 ´years ago | Derale Performance > Door Latch Rod | RH Passenger | Key/Latch | 68-77 Ford Bronco

Question 9

does unwelded mean it needs to be completely assembled or just weld the winch plate in and paint it? View answer

Asked 2 ´years ago | Full Size WH Winch Bumper (Unwelded Kit), 87-96 Ford Bronco & F150

Question 10

If we have a fiberglass hood, how does the upper bracket attach to the hood? Also, is it the same kit for the fiberglass hood as it is for the steel hood? View answer

Asked 4 ´years ago | Crow Enterprizes > Shox N The Hood | Black Hydraulic Hood Props | 66-77 Ford Bronco

Question 11

my 76 bronco manual shift on the column has this type of shift linkage retainer, looks like it was installed from the factory, does it also need the item# 8388 shift linkage retainer clip installed on the rod? View answer

Asked 3 ´years ago | Holley Performance Products > C4 Automatic Shift Linkage Retainer Bushing | 73-77 Bronco, 73-93 Ford Truck

Question 12

What Gas cap do you recommend for venting aftermarket EFI, i am currently running a FiTech but my switch to Sniper.<br>Thanks, Corey View answer

Asked 5 ´years ago | Billet Aluminum Gas Cap | Long Reach | 71-76 Bronco, 73-76 Ford Truck

Question 13

Will this fit a 61 ford unibody? View answer

Asked 4 ´years ago | Ignition Switch Kit | Switch, Spacer, Bezel & Cylinder | 66-77 Bronco, 61-66 Ford Truck

Question 14

Can I substitute a track bar riser instead? I plan on converting to tie rod over steering when I install the lift. View answer

Asked 4 ´years ago | Early Bronco 3.5-inch Suspension Lift w/WH Nitro All Terrain Shocks | System 3

Question 15

Will the knob come off? I bought billet knobs and can't find the old shaft View answer

Asked 3 ´years ago | Headlight Switch Knob + Shaft | OE-Type | 68-77 Bronco, 68-72 Ford Truck

Question 16

Will this fit a Grant Gt Elite 742 steering wheel? View answer

Asked 3 ´months ago | LubeLocker Ford 9-inch Competition Differential Cover Gasket

Question 17

Is the main difference between the Deluxe (7221NET) and the 7220NET kit, that the deluxe comes with the clutch plate in addition? View answer

Asked 4 ´years ago | AX15 Transmission Deluxe Kit (w/New Trans), T-Shift Dana 20, 66-72 Bronco

Question 18

Is a regulator needed with this pump? I have a edlebrock 4 barrel 650 View answer

Asked 3 ´years ago | Edelbrock Micro Electric Fuel Pump | 38 GPH @ 4-7 PSI | Fuel Type Gas/E85

Question 19

Will this work on my 77 Bronco with 302, auto, and factory distributor? Which of your other coils will work form my 77? Thanks. View answer

Asked 8 ´months ago | PerTronix Flame-Thrower HV Ignition Coil | E-Core | 60K Volt

Question 20

Is it possible that these shocks will fit 1986 Ford Bronco 2 XLT View answer

Asked 1 ´year ago | Bilstein 7100 Short Body Reservoir Shock | 255/70 | 34-in Extended, 19.5-in Collapsed

Question 21

It says based off 76-77 but it will work on all twin traction bar setups is what I'm reading I have an 86 just want to make sure that they'll work on later years as well View answer

Asked 5 ´years ago | Bilstein > Reid Racing Flat Top Dana 44 Knuckle | RH Passenger | 76-77 Ford Bronco

Question 22

What is the rotor diameter? View answer

Asked 12 ´months ago | Disc Brake Hub + Rotor Assembly | OE or Disc Kit | 66-86 Bronco, 76-86 Ford Truck

Question 23

Does the vent windows come with glass? Is the door glass tinted the same as the aftermarket windshields? View answer

Asked 4 ´years ago | Master Door Parts Kit - No Door Shells | Driver & Passenger | 68-77 Ford Bronco

Question 24

what side is the trans cooler on? View answer

Asked 6 ´years ago | Ron Davis Aluminum Radiator | Auto Trans Cooler | SBF V8 | 66-77 Ford Bronco

Question 25

How long is the main bar View answer

Asked 4 ´months ago | Fuel Tank Strap J-bolt | OE-Type | 66-77 Ford Bronco

Question 26

What is it? Is this something you screw onto the outside of the fender to mount another item/reflector over top? Is this for the turn signal in the grill? View answer

Asked 4 ´years ago | Side Reflector Mounting Pad | Front, LH Driver | 68-69 Ford Bronco

Question 27

Does this seat have mounting brackets, and does it use the factory rear seat mounting holes? View answer

Asked 2 ´years ago | Fender & Grille Emblem Badge Kit | Black Chrome | 66-77 Ford Bronco

Question 28

Sanden SD7 AC Compressor: I have purchased the 7127 and 7129 AC bracket. I am trying to locate a Sanden SD7, however there are several SD7's. Any idea where people are buying there's and the full part #? From what I can tell I think the SD7B10 would be the correct one. Can you confirm? View answer

Asked 6 ´months ago | Power Steering Pump Bracket | 96-01 Ford Explorer 5.0L

Question 29

my bronco does not have these seals, which side does the black go? View answer

Asked 3 ´years ago | Edelbrock Micro Electric Fuel Pump | 38 GPH @ 4-7 PSI | Fuel Type Gas/E85

Question 30

Is this sold as a set as pic shows or sold as singles? Thank you View answer

Asked 9 ´months ago | Bilstein 5100 Shock - Eye/Eye, 26' Extended, 16' Compressed

Question 31

Will the trac bar riser interfere with the bump stop or heavy duty spring cups? Also, what is the max amount of rise that it provides? View answer

Asked 4 ´years ago | Speedometer Cable | OE-Type, 72.5-inch | 66-77 Bronco, 57-72 Ford Truck

Question 32

Can this be painted? View answer

Asked 5 ´months ago | FlowKooler Water Pump | SBF 289 302 351W V8 | 66-77 Ford Bronco

Question 33

Are the hinges in black? View answer

Asked 2 ´years ago | Door Hinges + Limiting Straps | OE-Type | 66-77 Ford Bronco

Question 34

Do I still need the steering shock with this conversion? View answer

Asked 4 ´years ago | Power Steering Conversion Kit | Quick Ratio | 66-77 Ford Bronco

Question 35

My turn signal light broke and I am ordering 2 new turn signal lenses and 2 gaskets. Do I need these turn signal to body grill pads? What are they? Thank you. View answer

Asked 3 ´years ago | Black Turn Signal Body to Grille Pads | PAIR | 69-77 Ford Bronco

Question 36

What type of clip, item number ? View answer

Asked 2 ´years ago | One-Piece Door Window Kit | Vent Window Delete | PAIR | 68-77 Ford Bronco

Question 37

Do these Billet knobs fit in place of the factory knobs? And what is the part number for the blank bezels that match them (shown in the pictures? View answer

Asked 3 ´years ago | Billet Dash Knobs | Clear Anodized, Set of 5 | 66-77 Bronco, 68-72 Ford Truck

Question 38

I need a pressure hose in my 1978 Bronco 351m from my ford steering box to my saginaw power steering pump. Is hose 2111 correct for this application? View answer

Asked 6 ´years ago | Windshield Glass Seal | No Groove | 78-79 Bronco, 67-79 Ford Truck

Question 39

Can you use this intake and keep your stock 2 barrel carb? Or does this require an upgrade to a 4 barrel? View answer

Asked 3 ´years ago | Edelbrock Performer Black Intake Manifold | Ford 260 289 302

Question 40

will this work on a 86 ford bronco II View answer

Asked 4 ´years ago | Derale Performance > Door Striker Post Backing Plate | SINGLE | 66-77 Ford Bronco

Question 41

Does this MC bolt up to the Bendix booster? How tall is it? The pushrod in the booster was too long for the MC that I originally had. Found another MC but it is too tall and the hood touches the top of the MC. Had to shim the booster to angle down the MC. View answer

Asked 4 ´years ago | San Felipe Full Family Roll Bar Kit | Bare Steel | 66-77 Ford Bronco

Question 42

Is this kit made up of Distinctive Industries upholstery and foam? View answer

Asked 4 ´years ago | Parchment Seat Upholstery Set+ Foam | Front & Rear | 68-77 Ford Bronco

Question 43

Hi I have a 77 IH scout, it has a gm column non tilt. Is there an adapter available that would work with this steering wheel? View answer

Asked 3 ´years ago | Mark 7 Woody Black Billet Steering Wheel | Slotted 3-spoke | 14-inch

Question 44

Can the stock wiper cover be used with this top View answer

Asked 1 ´year ago | Red Paracord Grab Handles | Bolt-On, PAIR | 21-25 Ford Bronco

Question 45

Do these headers come with CO2 ports View answer

Asked 3 ´years ago | Pro Flow Ceramic Headers | SBF 289 302 351W V8 | 66-77 Ford Bronco

Question 46

Does anybody know if this speaker will fit with Vintage Air under the dash? View answer

Asked 4 ´years ago | RetroSound In-Dash Speaker | 68-77 Ford Bronco

Question 47

Will these work in a 79 f150? <br>Thanks for helping. View answer

Asked 8 ´months ago | Wild Horses Shock, Eye/Eye, 27' Extended, 16' Compressed

Question 48

Do these have the GM turn signal switch that also controls the headlight's high/low setting? View answer

Asked 4 ´years ago | Black Tilt Steering Column | Floor Shifter, 2-inch OD | Universal

Question 49

Since the Axle tubes are a smaller 3, does that mean we need to use smaller diameter U bolts when installing the leaf springs? I noticed your heavy duty Ubolt set uses 3 1/4 wide U bolts View answer

Asked 5 ´months ago | Super 9 Ford 9-inch Housing | Large Bearing | 66-77 Ford Bronco

Question 50

What is the distance between the posts? Same question for 9332? On both fenders I have a spot that has a 2 distance between two holes and I am looking for something to fit into the spot. Any recommendations are appreciated! View answer

Asked 2 ´years ago | 302 Fender Emblem + Clips | Early Style | 66-77 Ford Bronco

Browse by Topic