Question 1

I'm doing a frame-off restomod on my 77 and have leaking factory gear box and pump. Would this be a good option to refresh the factory system? I also bought a tilt-column from you along with 1 body lift and 2.5 suspension lift. Thanks! View answer

Asked 1 ´year ago | Power Steering Conversion Kit | Quick Ratio | 66-77 Ford Bronco

Question 2

Will this work with a center force 11 clutch? View answer

Asked 3 ´years ago | 80-96 Ford Bronco & Truck Accessories > Clutch Flywheel | 28 oz Balance, 164 Tooth | SBF 289 302 351W | 66-77 Ford Bronco

Question 3

What is the difference between the part #9303 and #9306 FORD lettering? View answer

Asked 4 ´years ago | BRONCO Grille Letters | 66-77 Ford Bronco

Question 4

Does the harmonic balancer come with a harmonic balancer bolt? View answer

Asked 2 ´years ago | Harmonic Balancer | 28 oz, 3-Bolt Pulley | SBF 289 302 351W | 66-77 Ford Bronco

Question 5

Will these work with changing back and forth from hard top to Rampage soft top? View answer

Asked 5 ´years ago | FAST TOP Hard Top Mount Kit | 66-77 Ford Bronco

Question 6

WHAT IS THE LENGTH OF 1 UNIT View answer

Asked 5 ´years ago | Braided Split-Sleeve Wiring Harness Loom | 1/8 to 1 inch | Sold by Foot

Question 7

will the Ram Assist work for steering without the gearbox? just using the ram like a rack and pinion? View answer

Asked 4 ´years ago | Steering Tie Rod & Drag Link Set | Complete | 78-79 Ford Bronco & F150

Question 8

Will the adjustment sleeve on the draglink get in the way of having a steering stabilizer and mounting brackets? View answer

Asked 1 ´year ago | Tie Rod & Drag Link Kit | 3-way Adjustable | 66-75 Ford Bronco

Question 9

What are the dimensions of this ? View answer

Asked 3 ´years ago | US Mags Indy Wheel | 15x7 | 5x5.5 Bolt Pattern

Question 10

What length (esp from below washer to end)? Dia & thread pitch?? View answer

Asked 3 ´years ago | Stainless Hardware Kit for Aluminum Valve Covers

Question 11

Are these axels new ? View answer

Asked 5 ´years ago | Ford 9-inch Rear Axles | 31/35-spline, Large Bearing, 11 inch | 76-77 Ford Bronco

Question 12

Do they come with those roadster doors? View answer

Asked 6 ´years ago | Custom Family Roll Cage | 8-point, Fully Welded | 66-77 Ford Bronco

Question 13

Does this come with a new front main seal? View answer

Asked 3 ´years ago | Aluminum Timing Chain Cover | SBF 289 302 351W V8 | 66-77 Ford Bronco

Question 14

Can you tell me the overall width? My bronco has a bumper with a hitch thats mounted inside the frame rails I am concerned that if this tank is much wider than stock it won't clear my situation.<br>Thanks View answer

Asked 2 ´years ago | M1A1 Stainless 23-gallon Fuel Tank + Skid Plate | 66-77 Ford Bronco

Question 15

Will these steering wheels work with the stock 3 speed column shifts? View answer

Asked 6 ´years ago | Mark 7 Woody Billet Steering Wheel | Slotted 3-spoke | 14-inch

Question 16

Is this the cap for #9729 1973 auxiliary fill tube? View answer

Asked 1 ´year ago | Vented Gas Cap | OE-Type, Paintable, 3.25-in OD | 71-76 Bronco, 73-76 Ford Truck

Question 17

will the high pressure of this pump make the 4x4x2 steering box feel twitchy on the road at highway speeds? It seems like the pressure for Ford steering is supposed run at a lower PSI and GPM than General Motors. View answer

Asked 1 ´year ago | Yukon Dana 44 Super Joint Kit | 4340 Chromoly, PAIR | 78-79 Bronco, 73-79 Ford Truck

Question 18

I have a set of Western Turbine 15 wheels, will these clear the calipers on the conversion kit? View answer

Asked 1 ´year ago | Front Disc Brake Conversion | Dana 30/44 | 66-75 Ford Bronco

Question 19

For future replacement, what are these brakes based on? View answer

Asked 3 ´years ago | 4-wheel Power Disc Brake Kit | Vacuum Boost | 67-75 Ford Bronco

Question 20

Which filler hose do I need for the M1A1 tank? View answer

Asked 5 ´years ago | Rear Main Fuel Tank Filler Hose | 66-77 Ford Bronco

Question 21

Are there provisions for or can windshield washer nozzles be installed??? View answer

Asked 2 ´years ago | Corbeau Seats > Buckaroo Fiberglass Hood | Deluxe | 66-77 Ford Bronco

Question 22

On the 4 inch leaf springs will they attach to the stock housing? View answer

Asked 5 ´years ago | Flex-Master 4-inch Lift Kit w/Bilstein 5100 Shocks | 78-79 Ford Bronco

Question 23

if these 15x7 wheels with a 3.75 backspace fit a 76-77 bronco with a 1/4 spacer, then shouldn't a 15x8 wheel with a 4 backspace fit a 76-77 bronco with a 1/2 spacer? View answer

Asked 5 ´years ago | US Mags Indy Wheel | 15x7 | 5x5.5 Bolt Pattern

Question 24

Is this the standard rotation pump for v-belt setups? View answer

Asked 2 ´years ago | FlowKooler Water Pump | SBF 289 302 351W V8 | 66-77 Ford Bronco

Question 25

Does the new AX 15 transmission come with a warranty? View answer

Asked 3 ´years ago | AX15 Kit with Brand New Transmission For 66-72 Bronco T-Shift Dana 20

Question 26

Does this wire in with the existing wires and does it work with back up light? View answer

Asked 4 ´years ago | LED Tail Light Board Conversion Kit, 66-77 Ford Bronco

Question 27

Is this the bracket that the handle mounts to on the vent window? View answer

Asked 3 ´years ago | Vent Window Handle Bracket | RH Passenger | 68-77 Ford Bronco

Question 28

Good morning , do the spark plug boots go in before headers are installed . View answer

Asked 1 ´year ago | Silver Spark Plug Boot Protectors | Set Of 8

Question 29

does everything come with it? including parts that go threw the firewall? View answer

Asked 2 ´years ago | MOAB Vacuum Boost Power Brake Conversion | 66-77 Ford Bronco

Question 30

How tall and wide are these letters? View answer

Asked 1 ´year ago | FORD Grille Letters | Chrome + OE Red Inserts | 67-77 Ford Bronco

Question 31

Do you have a three speed floor shifter so I could get rid of the column shift? View answer

Asked 5 ´years ago | Transfer Case T-Shifter Indicator Housing | 66-72 Ford Bronco

Question 32

My 1975 Bronco has always leaked where the stock slide-in dip stick tube connects with the oil pan. To use the screw-in dip stick tube, I'll need to buy a whole new pan that has the threaded female connection, right? Or is there another way? View answer

Asked 5 ´years ago | Screw-in Oil Pan Dip Stick Tube | Passenger Mount | 289 302 | 73-77 Ford Bronco

Question 33

Does this come painted or bare metal? View answer

Asked 2 ´years ago | Adjustable Drag Link | 28-30 inch | 66-75 Ford Bronco

Question 34

what is the ID of the center bolt hole?<br>Thanks View answer

Asked 8 ´months ago | Speedometer Drive Gear Clip | 66-91 Bronco, 57-91 Ford Truck

Question 35

can you give me the inside and outside diameter of the coil springs. View answer

Asked 5 ´years ago | Hose Fitting | 5/8-18 x 5/8-18 Inverted Flare | Sag/Del Pump to OE Pressure Hose

Question 36

I have a 2 body lift on a C4. Will this accommodate any shift linkage and lower arm needs? Or do I need to switch to a floor shifter? View answer

Asked 3 ´years ago | Tilt Steering Column Kit with Automatic Column Shifter | Custom Built

Question 37

Will this indicator work with a 4R70W transmission? I saw the C4 and C6 called out, so I wanted to check. View answer

Asked 2 ´years ago | Baja Kits > USA Gear Dana 44 Ring & Pinion | 4.56 Gear Ratio | 71-77 Bronco, 57-77 Ford Truck

Question 38

why won't this fit a 1977 bronco View answer

Asked 5 ´years ago | Married NP205 Transfer Case Gasket and Seal Kit | 78-79 Bronco, 73-79 Ford Truck

Question 39

How about 37 what do I need to do? Bronco Badland 2 drs 2022 View answer

Asked 2 ´years ago | Perch Collar 1-inch Leveling Kit for Factory Bilstien Equipped 2021+ Ford Bronco

Question 40

I haven't mounted my seats yet, do you think it will fit if I mount the seats later? View answer

Asked 3 ´years ago | Lock & Load MAXimum Security Center Console, 8-inch Wide

Question 41

Are they sold as pair or individual? View answer

Asked 6 ´years ago | Billet Headlight Rings | PAIR | 66-77 Ford Bronco

Question 42

Hi. I have a stock 1976 Bronco with a V8. I would like to purchase the Super Mega kit (#5586NET). I have never taken on such a big job. Does the kit include instructions or a diagram to complete the assembly? View answer

Asked 1 ´year ago | SUPER MEGA Early Bronco Body Tub Kit w/Flared Quarters & Bolt-On Parts

Question 43

The version with brackets, are they sliders or just the brackets. View answer

Asked 11 ´months ago | Dakota Digital VHX Dash | Black Alloy & White | 78-79 Bronco, 73-79 Ford Truck | VHX-73F-PU-K-W

Question 44

How do you install these? are there clips or screws? View answer

Asked 2 ´years ago | ALPINE HydroBoost Power Brake System, 66-77 Ford Bronco

Question 45

Does #5808 not come with this? Seems like it should. View answer

Asked 5 ´years ago | Stainless Tailgate Handle Kit, 66-77 Bronco

Question 46

do these come with attaching nuts? View answer

Asked 10 ´months ago | Bronco Sport Script Fender Emblem + Clips | Chrome | 67-77 Ford Bronco

Question 47

Does this include an oil pan gasket? View answer

Asked 6 ´months ago | Engine Oil Pan Kit | Ford 351W | 66-77 Ford Bronco

Question 48

Will these work with Centech harness? View answer

Asked 3 ´years ago | LED Dash Instrument Cluster Lights, 66-77 Ford Bronco

Question 49

Purchasing as option #2 or #3: does it come with the necessary mounting hardware? Does the stock hardware need to be reused? View answer

Asked 3 ´years ago | Lokar Billet Aluminum E-Brake Pedal Pad | 66-91 Bronco, 61-91 Ford Truck

Question 50

I recently installed a Holley Sniper and am wondering if this Gas Cap will be vented well enough so that I do not have to have a secondary vent coming off the tank itself. I currently have a secondary vent line off the tank running up into my rear bed pillar, the only issue is when doing harder trails I get a lot of slosh and spillage out of this vent line. Hoping to eliminate the smell and the waste of fuel. Thanks View answer

Asked 9 ´months ago | Vented Gas Cap | OE-Type, Paintable, 3.25-in OD | 71-76 Bronco, 73-76 Ford Truck

Browse by Topic