Question 1

What is the break system based off of? When I need to replace the pads or rotors what are they from, how, where can I get new ones? View answer

Asked 3 ´years ago | MOAB 4-wheel Power Disc Brake Kit | Hydroboost | 67-75 Ford Bronco

Question 2

What is the PSI and GPH the pump for this tank puts out? It will be used with the Edelbrock Pro-Flo 4 EFI for a 351W which requires a high pressure fuel system providing 43-45 or 58-60 psi of fuel pressure with a minimum flow rating of 57 GPH (215 liter/hr). View answer

Asked 3 ´years ago | M1A1 Stainless 23-gallon Fuel Tank + Skid Plate | 66-77 Ford Bronco

Question 3

What is the max amps the fuel pump pulls? View answer

Asked 2 ´years ago | M1A1 Stainless 23-gallon Fuel Tank + Skid Plate | 66-77 Ford Bronco

Question 4

What is the operating Ohm Range for the Sending Unit for this kit? My stock gauge works when it feels like it... ( Aftermarket Gauges list the Operating Range between 0 to 90, or 0 to 75 ohm ranges.) looking to replace my tank with this Unit. View answer

Asked 6 ´years ago | M1A1 Stainless 23-gallon Fuel Tank + Skid Plate | 66-77 Ford Bronco

Question 5

I have a 1966 Bronco with 6 knobs. Will these fit on a 66' and then just buy 1 extra or what would be best? (Flasher, Temp Control, Fan, Pull for heat, Choke, and Lights) View answer

Asked 10 ´months ago | Billet Dash Knobs | OE-Look, Black w/Silver, Set of 5 | 66-77 Bronco, 68-72 Ford Truck

Question 6

Are these 2-1/2 inches or 3 inches inside measurements? View answer

Asked 8 ´months ago | Radiator Mounts + Rubber Insulators | Black, 3-Core | 66-77 Ford Bronco

Question 7

Three questions, what is the diameter of the wheel, how far back (towards the driver) does the 2977 adapter move the wheel, and does the adapter come in black? View answer

Asked 2 ´years ago | Mark 7 Billet Steering Wheel | Slotted 3-spoke | 14-inch

Question 8

Will this cubby fit with the NP435 install and factory shifter? View answer

Asked 3 ´years ago | Chrome Window Moulding Trim Kit | 66-77 Ford Bronco

Question 9

There are different types of stainless steel. some rust some don't. Magnets don't stick to the ones that don't. Does a magnet stick to this fuel tank? View answer

Asked 3 ´years ago | M1A1 Stainless 23-gallon Fuel Tank + Skid Plate | 66-77 Ford Bronco

Question 10

The 5.0 Radiator will not fit with the F100 2WD power steering conversion in 66-77 Broncos. Is this conversion have the PS unit on the inside of the frame or outside? View answer

Asked 5 ´years ago | Ron Davis Aluminum Radiator | SBF 289 302 351W V8 | 66-77 Ford Bronco

Question 11

i have a 76 small bronco and want to make sure i order the right kit for front and rear. the 140-13305 correct for the front and the rear the 140-13323? Thanks View answer

Asked 4 ´months ago | Wilwood Front Disc Brake Kit | 6-Piston, 12.88 inch Rotors | 76-77 Ford Bronco

Question 12

do you have these in stock? View answer

Asked 7 ´months ago | Door Shell + Bolt-In Upper Window Frame | LH Driver | 68-77 Ford Bronco

Question 13

What are the mounting hole sizes on both ends. Thanks View answer

Asked 1 ´year ago | Adjustable Track Bar | XD 4140 Chromoly | 78-79 Bronco, 76-79 Ford F150 4x4

Question 14

Will the bushings fit on a 1978 bronco? If not do you sell them? Thanks View answer

Asked 4 ´years ago | Dash Control Knobs + Bezels Renew Kit | OE-Type | 74-77 Ford Bronco

Question 15

I'm looking to upgrade calipers and rotors on my 69 bronco. It went through a front disk brake conversion at some point and has an Adelco Moraine 5470 caliper. Will this replace that? What rotors would I need to replace those as well? View answer

Asked 5 ´years ago | Wilwood GM D52 Dual Piston Calipers | Red, PAIR | 140-11290-R

Question 16

Will the defroster hoses fit a 71 Plymouth Duster View answer

Asked 1 ´year ago | Defroster Duct Hose | SINGLE | 66-77 Bronco, 48-66 Ford Truck

Question 17

Is this a correct direct fit on a 74 or are modifications required View answer

Asked 5 ´years ago | Wilwood Rear Disc Brake Kit | 4-Piston, 14 inch, Lg Bearing | 76-77 Ford Bronco

Question 18

I have a 1970 with manual steering and a 302. There is Vintage AC installed also. Do you recommend the standard or deluxe kit and will the it fit with the Vintage Air system? What else would I need besides the kit? View answer

Asked 3 ´months ago | Dana 30 King Pin Rebuild Set | Upper or Lower | 66-71 Ford Bronco

Question 19

My bronco has a 3 1/2 lift on it. Are the Frame to diff stainless lines sized long enough to accommodate for the added length needed? View answer

Asked 3 ´years ago | 4-wheel Power Disc Brake Kit | Vacuum Boost | 67-75 Ford Bronco

Question 20

1977 Ford Bronco. I am looking for the rear plastic fuel tank for the 1977. I can find tanks for 1976 and 1978. What is so different? View answer

Asked 3 ´years ago | Rear Main Fuel Tank Master Kit | OE-Type | 66-76 Ford Bronco

Question 21

Is this for one or two panels? View answer

Asked 2 ´years ago | Billet Hose Separator Clamp for WH SS Brake Hose | Black Anodized

Question 22

Will these axles fit through drum brake knuckles ? or do you have to remove knuckles to install ? Thanks View answer

Asked 1 ´year ago | Dana 44 Axles + Spicer 760X U-Joints | 4340 Chromoly | 66-77 Ford Bronco

Question 23

Does this top fit snug on the San Felipe Family Interior Bar Kit part # 4241 ? View answer

Asked 4 ´years ago | Family Cage Black Roll Bar Top Kit, 66-77 Ford Bronco

Question 24

What is the depth of the shroud? I have the explorer setup and the fan is pretty far from the radiator. View answer

Asked 3 ´years ago | Full Circle Aluminum Radiator Fan Shroud | SBF V8 | 66-77 Ford Bronco

Question 25

Can the skid plate be purchased separately View answer

Asked 3 ´years ago | M1A1 Stainless 23-gallon Fuel Tank + Skid Plate | 66-77 Ford Bronco

Question 26

Are these sold individually or as a pair? View answer

Asked 4 ´years ago | Front Turn Signal Assembly w/Clear Lens | 66-68 Ford Bronco

Question 27

Are these sport-mode shifters are available for several applications in different shifter lever lengths and knob styles? Is this kit complete or is there anything else we need to order for a EB outside of the boot and ring? View answer

Asked 5 ´years ago | Lokar 6R80 Automatic Electronic Sport Mode Shifter

Question 28

Hi, I can't find the specs. Would it be possible to send? Mostly interested in the width and height (assembled). Also the angled pieces that mount back by the rear fenders ... what is the distance from the main hoop? Thanks! View answer

Asked 2 ´years ago | Chrome Tilt Steering Column | Automatic Column Shifter, 2.25-inch OD | Universal

Question 29

What is the difference between this (PP10113), and 6095CW (which does not say Direct Fit). Thanks View answer

Asked 4 ´years ago | Painless Direct Fit 28 Circuit Wiring Harness with Switches 66-77 Ford Bronco (6095C)

Question 30

are these for chevy conversion? View answer

Asked 3 ´years ago | Disc Brake Caliper Pads for WH Front Disc Conversion

Question 31

Do these simulated beadlocks come with lug nuts, center caps and front axle sleeve? View answer

Asked 5 ´years ago | TrailReady Simulated Beadlock Wheel | Select Bolt Pattern | 15x8.5

Question 32

what is the maximum tire size possible for this set-up? View answer

Asked 5 ´years ago | Early Bronco 1.5-inch Suspension Lift w/Bilstein 5100 Shocks | System 3

Question 33

All of these say 67-77. What about 66? Really no difference that I'm aware of. Also doesn't say anything about D30 or D44 front end. View answer

Asked 4 ´years ago | MOAB 4-wheel Power Disc Brake Kit | Hydroboost | 67-75 Ford Bronco

Question 34

Seeing conflicting operating temps for stock 1973 302. What thermostat do you recommend? View answer

Asked 1 ´year ago | Thermostat | 180-Degree, Heavy Duty | 66-86 Bronco, 48-79 Ford Truck

Question 35

Does the harmonic balancer come with a harmonic balancer bolt? View answer

Asked 1 ´year ago | Harmonic Balancer | 28 oz, 3-Bolt Pulley | SBF 289 302 351W | 66-77 Ford Bronco

Question 36

Needing dimensions of your 5004 aluminum fan shroud Thanks View answer

Asked 5 ´years ago | Full Circle Aluminum Fan Shroud, SBF V8, 2-inch Body Lift, 66-77 Ford Bronco

Question 37

WHAT IS THE LENGTH OF 1 UNIT View answer

Asked 5 ´years ago | Braided Split-Sleeve Wiring Harness Loom | 1/8 to 1 inch | Sold by Foot

Question 38

Are these axles the same diameter as stock where the slinger goes? I already have parts to rebuild my front Dana44 but realized that I need new axles, and would like to use my new, stock sized slingers. Thanks View answer

Asked 1 ´year ago | Dana 44 Axles + Spicer 760X U-Joints | 4340 Chromoly | 66-77 Ford Bronco

Question 39

Do you guys carry the seal between the firewall and throttle linkage View answer

Asked 5 ´years ago | Throttle Linkage Kit | SBF 289 302 351W V8 | 66-77 Ford Bronco

Question 40

Who and where is oil sending unit made? 8054 View answer

Asked 4 ´years ago | Oil Pressure Sending Unit | 66-88 Bronco, 64-87 Ford Truck

Question 41

Does the Racket Jacket Wheel Well kit include the quarter panel pieces? View answer

Asked 10 ´months ago | NP435 4-speed Transmission Gasket and Seal Kit

Question 42

will the Ram Assist work for steering without the gearbox? just using the ram like a rack and pinion? View answer

Asked 4 ´years ago | Steering Tie Rod & Drag Link Set | Complete | 78-79 Ford Bronco & F150

Question 43

Do you need to buy a top channel for the windshield for this appllication? View answer

Asked 11 ´months ago | Wilwood GM D52 Dual Piston Calipers | Red, PAIR | 140-11290-R

Question 44

I understand the lines are SS. Are the fittings SS as well? Also, are they 3/16 diameter? View answer

Asked 4 ´years ago | Paul B.

Question 45

I'm confused as to why these will fit a 79' Bronco but not my 79' F-150, how are they different? View answer

Asked 4 ´years ago | Extreme Duty Leaf Spring U-bolts | 78-79 Ford Bronco

Question 46

What length (esp from below washer to end)? Dia & thread pitch?? View answer

Asked 2 ´years ago | Stainless Hardware Kit for Aluminum Valve Covers

Question 47

The drivers side wheel well on a two gas tank rig has a different shape. Is there a specific kit for that? View answer

Asked 3 ´years ago | NP435 4-speed Transmission Gasket and Seal Kit

Question 48

Is this a greaseless UJ? Are they mounted each end of the drive shaft? View answer

Asked 2 ´years ago | Super-Flex U-Joint for Front Driveshaft | 1310 Series

Question 49

Do they come with those roadster doors? View answer

Asked 5 ´years ago | Custom Family Roll Cage | 8-point, Fully Welded | 66-77 Ford Bronco

Question 50

What is the spline count on the yoke? View answer

Asked 3 ´years ago | Extreme Duty Dana 20 Transfer Case Output System | Assembled | 66-77 Bronco

Browse by Topic