Question 1

Does this adapter have slip rings that ride on the spring loaded pins of the stock column, and if it does, what is the setup for a horn button? View answer

Asked 5 ´years ago | Black Billet Steering Wheel Adapter | OE Column | 66-73 Bronco, 1967 Ford Truck

Question 2

What is the master cylinder bore? View answer

Asked 8 ´months ago | MOAB Vacuum Boost Power Brake Conversion | 66-77 Ford Bronco

Question 3

I will be installing your 2.5 lift kit and a 1 body lift. Will this arm work or is it too much of a drop for that combination? I will also add an adjustable track bar. View answer

Asked 4 ´years ago | Half Cab Window Glass Seal | Slotted for Chrome | 66-77 Ford Bronco

Question 4

Are the leaf springs also progressive? Thanks View answer

Asked 4 ´years ago | Early Bronco 2.5-inch Suspension Lift w/Rancho 9000XL Shocks | System 3

Question 5

Does this kit come with the new steering column seal? Thank you View answer

Asked 7 ´months ago | IDIDIT Direct Fit Tilt Column, Black, Floor Shift, 76-77 Bronco

Question 6

Are individual pieces available for the hood install kit ? I need ball stud and lock nut for shock/strut View answer

Asked 10 ´months ago | Crow Enterprizes > Fiberglass Hood Install Kit + Stainless Hood Shocks | 66-77 Ford Bronco

Question 7

What is the availability of this tank? Thanks View answer

Asked 3 ´years ago | M1A1 Stainless 23 Gallon EFI Fuel Tank + Skid Plate | In-tank Pump | 66-77 Bronco

Question 8

Is this kit a pair or just one brace? View answer

Asked 3 ´years ago | Front Fender Brace + Clips | OE-Type, Stainless | 67-77 Ford Bronco

Question 9

Do you offer a full kit like with the AX-15? Transmission, transfer case shifter etc. View answer

Asked 3 ´years ago | Deluxe NV3550 Transmission Adapter Kit | No Trans | 66-77 Ford Bronco

Question 10

Can I use my same hoses? Or do I need to get new ones? If so do you carry the correct ones I will need? Thanks View answer

Asked 4 ´years ago | Custom Rocker Switch Panel | 6 Switches | Brushed Stainless

Question 11

Does this match the original Ginger interior? The picture exposure makes it appear a little more orange vs ginger. Or do you have samples? View answer

Asked 10 ´months ago | Wilwood Front Disc Brake Kit | 4-Piston, 12.19-in Rotors | 76-77 Ford Bronco

Question 12

Are these mirrors larger than the stock mirror and if yes what are the dimensions? View answer

Asked 4 ´years ago | Billet Rides Door Mirrors, Polished Aluminum, Pair, 68-77 Bronco

Question 13

Is this transmission available for will call pick up, or does it ship from the factory? I live a couple hours away and could save a little cash by driving to the WH warehouse. View answer

Asked 2 ´years ago | AX15 Transmission Deluxe Kit (w/New Trans), T-Shift Dana 20, 66-72 Bronco

Question 14

I have a '72 and I am running a front cage, will this still fit or should a get the flat one for the 66-67? View answer

Asked 2 ´years ago | Dakota Digital VHX Dash | Silver Alloy & White | 66-77 Bronco, 61-66 Ford Truck

Question 15

I do not see the rods on the site. Do you sell the rods with strikers or cam? View answer

Asked 4 ´years ago | Liftgate Latch Rod Cam + Clips | Spider Gear | 66-77 Ford Bronco

Question 16

Install instructions for a novice? View answer

Asked 1 ´year ago | Door & Ignition Lock Set | 66-77 Ford Bronco

Question 17

cant find mounting info dose it mount to frame or body View answer

Asked 7 ´months ago | Auxiliary Side Fuel Tank Master Kit + Skid Plate | 66-77 Ford Bronco

Question 18

which pilot bearing do I use for zf conversion View answer

Asked 8 ´months ago | Clutch Pilot Bearing Bushing | NV3550 NV4500 | SBF Ford 289 302 351W

Question 19

What size bolts do you need for the door to window frame? Is that bolt included in the SS bolt kit? View answer

Asked 2 ´years ago | Door Shell + Bolt-In Upper Window Frame | RH Passenger | 68-77 Ford Bronco

Question 20

Are these genuine Spicer Dana USA factory OEM parts? Are they zerk fitting lubed or sealed (lubed for life) type parts? Thanks View answer

Asked 2 ´years ago | Driveshaft Rebuild Kit | U-Joints + CV Yoke | 66-77 Ford Bronco

Question 21

What is the diameter of the spring? View answer

Asked 5 ´years ago | Crankshaft Pulley | Stock 302 w/Explorer 5.0 Front Drive | 66-77 Bronco

Question 22

I installed the pins in the 2 holes in the back, but still does not cancel turn signal after a turn is made. Have any other ideas, or suggestions? This is installed on a stock 1976 steering column with default internals. Adapter mates up well and the horn works - just not the cancel pins. View answer

Asked 1 ´year ago | Reid Racing Dana 60 Kingpin Knuckle | LH Driver | Ford

Question 23

What do I need to mount this pump to my 1998+ Explorer 5.0 serpentine bracket set up? View answer

Asked 10 ´months ago | Yukon Dana 44 Super Joint Kit | 4340 Chromoly, PAIR | 78-79 Bronco, 73-79 Ford Truck

Question 24

What are these molding made of, Alum, SS or chromed steel?, and where are they manufactured? View answer

Asked 10 ´months ago | Complete Molding Kit w/ Stock Tire Carrier Original Ford Tooling - Made in USA

Question 25

WAS WANDERING WHICH DIRECTION DOES THE KICKPANEL INSERT GO. LONG END WITH LIP TOWARDS HEATER BOX OR SHORT END TOWARDS HEATER BOX? WAS THINKING SHORT END TOWARDS BOX AND LONG END TOWARDS FENDER TO PREVENT WATER FROM COMING THRU? THANKS IN ADVANCE! View answer

Asked 5 ´years ago | Heater Air Inlet Duct | 66-77 Ford Bronco

Question 26

GOAT would be cool too. View answer

Asked 4 ´years ago | BRONCO Grille Letters | 66-77 Ford Bronco

Question 27

Can I get the dimensions on the shroud Width, Length, depth, Etc. Thank You, View answer

Asked 5 ´years ago | Full Circle Aluminum Radiator Fan Shroud | SBF V8 | 66-77 Ford Bronco

Question 28

Do you have this set in black? Can these be painted black? View answer

Asked 1 ´year ago | Billet Light Bezels | Headlight, Tail Light, Marker | 70-77 Ford Bronco

Question 29

Does the kit come with 6 bolts? Enough for both doors View answer

Asked 4 ´years ago | Bolt-In Door Window Frame Mounting Hardware | 66-77 Ford Bronco

Question 30

Does the filter come with the lower pan that sits on the throttle body? View answer

Asked 5 ´years ago | K&N X-Stream Airflow Washable Air Filter Assembly | 66-79 Ford Bronco

Question 31

I have a Holley Sniper EFI. Will this replace the stock linkage? Would this be a bolt on replacement? View answer

Asked 6 ´years ago | Stainless Throttle Cable | 24-inch

Question 32

do the rear arm rests require screws to secure them? View answer

Asked 4 ´years ago | Door Side Mirror | Chrome, Convex Glass | 1967 Ford Bronco

Question 33

Will this top work with stock doors? View answer

Asked 4 ´years ago | Family Cage Black Roll Bar Top Kit, 66-77 Ford Bronco

Question 34

I need this knob for the headlight , mine is a 75 model . shaft and knob are together. View answer

Asked 6 ´years ago | Billet Dash Knob | Clear Anodize, SINGLE | 66-77 Bronco, 61-72 Ford Truck

Question 35

What is the lumen output on low and high beam and is it the same for the 6145w lamps? View answer

Asked 5 ´months ago | Revolution LED Headlights | Chrome w/Halo, 7' Round | 66-78 Bronco, 48-78 Ford Truck

Question 36

Whats the difference between the RS and SS Baja seats? are they both suspension seats? Is the cloth/vinyl combo water resistant? Thanks guys View answer

Asked 5 ´years ago | Fuel Inertia Switch Pigtail for Fuel Pump

Question 37

What is the size of the stud? Is it 5/16? View answer

Asked 4 ´years ago | Adjustable Hood Front Bumpers | Large, PAIR | 66-77 Ford Bronco

Question 38

Will this kit work for a 1977 CJ5CJ7 Jeep. Front and backs View answer

Asked 1 ´year ago | Tremec TR4050 Transmission Mount | Urethane

Question 39

I'm looking for the bushings for the clutch and brake pedals, stock were white plastic. View answer

Asked 5 ´years ago | Dual Return Power Steering Pump + V-Belt Pulley | Heavy Duty, Delphi-Style

Question 40

Checking out this pump What is the highest RPM functioning capabilities of this pump its going on a higher performance street car. Thanks Ken View answer

Asked 1 ´year ago | FlowKooler Water Pump | Serpentine, Reverse Rotation | 84-93 Mustang 5.0L

Question 41

Will the stock filler neck work on this tank? View answer

Asked 6 ´months ago | M1A1 Stainless 23 Gallon EFI Fuel Tank + Strap Mount | In-tank Pump | 66-77 Bronco

Question 42

Will inboard shock hoop location affect the installation of twenty gallon rear tank or is the location forward of rear crossmember? View answer

Asked 6 ´years ago | Early Bronco 5.5-inch Suspension Lift w/Bilstein 5100 Shocks | System 16

Question 43

What is the diameter of the balls? View answer

Asked 2 ´years ago | Dana 20 Transfer Case Detent Ball & Spring Kit | 66-77 Ford Bronco

Question 44

Do the axles come with Bearings installed? View answer

Asked 4 ´years ago | Ford 9-inch Rear Axle Shafts | 35-spline, PAIR | 78-79 Bronco, 73-79 Ford F150 4WD

Question 45

ON the door side only quick release hinges ...What do you use for the body side for this hinge ?? Thanks Carl View answer

Asked 5 ´years ago | Quick Remove Door Hinges | Door Side Only, Stainless | 66-77 Ford Bronco

Question 46

The description says Silver Satin but the picture has a brass or gold hue to it. Can you confirm that these are indeed Sliver Satin? View answer

Asked 2 ´years ago | Door Side Mirrors + Outer Door Handles Set | Silver Satin | 68-77 Ford Bronco

Question 47

I have no wires in the frame now. The kit comes with short wires on the switch. Do I just pull the 8 or so wires shown on the instructions up through the frame on the drivers side and run to the motors? View answer

Asked 5 ´years ago | Synchronized Electric Windshield Wiper Kit | Dual Motor | 66-77 Ford Bronco

Question 48

does this windshield gasket have the slotted channel in it for the chrome trim? View answer

Asked 1 ´year ago | Windshield Glass Seal | No Groove | 66-77 Ford Bronco

Question 49

Can you fit these to a 1966? View answer

Asked 3 ´years ago | Master Door Parts Kit with Door Shells | Driver & Passenger | 68-77 Ford Bronco

Question 50

What is the finish on the two pieces? Do they need to be painted? View answer

Asked 1 ´year ago | Windshield Fold-Down Latch | 3-piece Kit | 66-68 Ford Bronco

Browse by Topic