Question 1

For the outer axle for the ford 44 how many splines and what are the hole diameters on the axle View answer

Answer posted 3 years ago | Dana 44 Outer Axle | 4340 Chromoly, Ford Brakes | 66-79 Ford Bronco, 73-79 F150

Question 2

Will this fit on a 1966 Bronco dash? View answer

Answer posted 3 years ago | Early Bronco Suspension > Dash Pad | Saddle, OE-Type | 68-77 Ford Bronco

Question 3

Does the cap xxxx on billet hose clamps go all the way through the clamp so it can be fastened to the frame by drilling and tapping a hole in the frame? View answer

Answer posted 3 years ago | Black Billet Hose Separator Clamp 1/2 ID

Question 4

Is this the thick rubber seal on the bottom sides of the removable top? Is this price for the pair? Thank you. View answer

Answer posted 3 years ago | Quarter Panel to Roof Seals | PAIR | 78-79 Ford Bronco

Question 5

What is the distance between the xxxx on the mirrors trying to determine if I will be able use existing hole(s) and/or cover up one or both part #6504 View answer

Answer posted 3 years ago | Door Side Mirror | OE-Type Chrome | 68-79 Bronco, 67-79 Ford Truck

Question 6

Can this be used for manual transmission? If not do you have one that will? View answer

Answer posted 3 years ago | Dakota Digital RTX Dash | OE-Look | 66-77 Bronco, 61-66 Ford Truck

Question 7

Will the Mile Marker hubs work with the front disc brake conversion for the Dana 44? Or do I need to go with Warne hubs. View answer

Answer posted 3 years ago | Mile Marker Chrome Locking Hubs | Dana 30/44, 19-spline | 66-77 Bronco, 73-93 F150

Question 8

Does this setup work with leaf springs suspension? View answer

Answer posted 3 years ago | Power Steering Conversion Kit | Quick Ratio | 66-77 Ford Bronco

Question 9

Any dimensions? How do I know this fits what I have (77 F-150 4x4) View answer

Answer posted 3 years ago | Windshield Glass Seal | Slotted For Chrome | 66-77 Ford Bronco

Question 10

Are these stainless or do they have to be painted? View answer

Answer posted 3 years ago | Door Hinges + Limiting Straps | OE-Type | 66-77 Ford Bronco

Question 11

Will this fit a 1966 Bronco with the Dana 20 transfer case mounted to a 4R70W transmission View answer

Answer posted 3 years ago | Dana 20 Twin Stick Transfer Case Shifter | AOD AODE 4R70W | 66-77 Ford Bronco

Question 12

I have a 1976 Ford F150 Ranger XLT and has a single gas ank and cap. Will this fit my truck? View answer

Answer posted 3 years ago | Metal Fuel Filler Neck | Main (Rear) Tank | 66-76 Ford Bronco

Question 13

Hi, my question is how many degrees of taper have the 1.5 blocks and if you sell the block pair without the U bolts? thanks Amaury View answer

Answer posted 3 years ago | Racket Jacket Wheel Well Insulation Kit, 66-77 Bronco

Question 14

Do they work well to get the tires out a little more on all four for body protection? Stress on axels or spindles ? View answer

Answer posted 3 years ago | Billet Aluminum 1.25-inch Wheel Spacers | PAIR | 5 x 5.5 Bolt Pattern

Question 15

Is the price per pair or each? View answer

Answer posted 3 years ago | JW Speaker Chrome LED Headlights | 8700 Evolution 2 | 66-78 Bronco, 48-78 Ford Truck

Question 16

Is there a way to adapt this kit for use with a Wilwood master cylinder manual brake setup? It looks like a right-side mount would interfere with the exhaust headers, but I am wondering if there is enough clearance from the inner fender using the left-side mount. Thanks. View answer

Answer posted 3 years ago | MOAB Vacuum Boost Power Brake Conversion | 66-77 Ford Bronco

Question 17

Does this top fold back easily for riding topless when wanted? View answer

Answer posted 3 years ago | Rampage Black Crush Vinyl Soft Top, 66-77 Ford Bronco

Question 18

Will this cubby fit with the NP435 install and factory shifter? View answer

Answer posted 3 years ago | Chrome Window Moulding Trim Kit | 66-77 Ford Bronco

Question 19

Have a 76 with Full width reverse Dana 44. Will this kit work? Do you have options for my setup? Thanks. View answer

Answer posted 3 years ago | Dana 20 Transfer Case Adapter | Ford C6 Automatic | 66-77 Ford Bronco

Question 20

E-Brake Spreader Bar for 11 inch Drum, 66-77 Ford Bronco View answer

Answer posted 3 years ago | Transfer Case T-Shifter Indicator Housing | 66-72 Ford Bronco

Question 21

It appears that these panels don't have a cutout for the door handle cup and window roller, is this correct? View answer

Answer posted 3 years ago | 1/4 inch Wheel Spacer | SINGLE | Fits 5x5.5 & 6x5.5 Bolt Patterns

Question 22

77137 are they front or rear shocks for 1966 bronco ? View answer

Answer posted 3 years ago | WILD HORSES Shock | White, Stud to Eye | 26-in Extended, 15-in Collapsed

Question 23

Does this kit allow the window to drop fully into the door or does it leave part of the glass showing when in the down position? View answer

Answer posted 3 years ago | EZ Power Window Kit | 66-77 Ford Bronco

Question 24

What are the dimensions of the 1310 u joint? View answer

Answer posted 3 years ago | Super-Flex U-Joint for Front Driveshaft | 1310 Series

Question 25

Do these use proprietary brake pads that are only available from you, or are replacements available from a local auto parts store? View answer

Answer posted 3 years ago | 2-Port USB Round Socket for Custom Mount

Question 26

How long is the cable?. View answer

Answer posted 3 years ago | Heater Temperature Control Cable & Bezel, 73-77 Ford Bronco

Question 27

Will this 6048w harness work on my HO 5.0 engine View answer

Answer posted 3 years ago | WH Custom Fuel Injection Wiring Harness | 86-93 Ford 5.0L

Question 28

Is it possible to just order the rear seat in this black and white houndstooth? View answer

Answer posted 3 years ago | Billet Aluminum 1-inch Body Lift Blocks | Set of 8 | 66-77 Ford Bronco

Question 29

Will this windshield frame work on a 68 half cab? View answer

Answer posted 3 years ago | Windshield Frame | Electric Wipers, OE-Type | 69-77 Ford Bronco

Question 30

Will it be easier to put the long tube headers on before I install my new 351w, will they fit AFR heads? View answer

Answer posted 3 years ago | Pro Flow Ceramic Headers | SBF 289 302 351W V8 | 66-77 Ford Bronco

Question 31

What is the overall diameter of the base that bolts to the hood..? View answer

Answer posted 3 years ago | Billet Aluminum Hood Pins | Clear Anodized

Question 32

Will this fit my 1966 ford Fairlane? View answer

Answer posted 3 years ago | Cowl Side Extension Panel Kit | 4-piece | 66-77 Ford Bronco

Question 33

I haven't mounted my seats yet, do you think it will fit if I mount the seats later? View answer

Answer posted 3 years ago | Lock & Load MAXimum Security Center Console, 8-inch Wide

Question 34

Does it fit over the speedometer cluster or fit in it? View answer

Answer posted 3 years ago | WH Billet Gauge Cluster + Column Bezel | Clear Anodized | 66-77 Ford Bronco

Question 35

What's the difference between the import version and the oem version? View answer

Answer posted 3 years ago | Window Crank Handle + Knob Set | SINGLE | 68-77 Bronco, 68-72 Ford Truck

Question 36

Primary tube size? View answer

Answer posted 3 years ago | Small Block Ford Shorty Headers w/O2 | Stainless | SBF 289 302 5.0L V8

Question 37

I am going to purchase the Racket Jacket Floor System, should I also purchase this Firewall Insulator for max insulation? Or does the Racket Jacket Floor System cover the firewall? Thanks! View answer

Answer posted 3 years ago | Front Fender Brace + Clips | OE-Type, Stainless | 67-77 Ford Bronco

Question 38

Will this fit a 1966 Bronco Half Cab? Thank you View answer

Answer posted 3 years ago | Water Resistant Car Cover | 66-77 Bronco - Also fits 21-25 Bronco 2-Door

Question 39

How long is the Clutch Fork Push Rod Item #: 8163? thanks View answer

Answer posted 3 years ago | Clutch Fork Push Rod | 66-77 Bronco, 65-72 Ford Truck

Question 40

Does your rebuild kit come with a detailed schematic/drawing of the transfer case assembly? View answer

Answer posted 3 years ago | Dana 20 Transfer Case Rebuild Kit | Super Deluxe | 66-77 Ford Bronco

Question 41

What size inlet barb is this. My 73 has a 5/16. View answer

Answer posted 3 years ago | V8 Fuel Pump | SBF 289 302 351W V8 | 69-77 Ford Bronco

Question 42

Will these work on a 3/8 fuel line? I thought the original nylon line was 5/16 but I have 3/8 View answer

Answer posted 3 years ago | Billet Aluminum Battery Hold Down | Clear Anodized | 66-86 Bronco, 65-86 Ford Truck

Question 43

Can an LED bulb be used, if so which one? View answer

Answer posted 3 years ago | H4 Headlight Conversion Kit w/Night Lighter Harness, 66-77 Ford Bronco

Question 44

The OEM trim has a bit of a satin finish to it around the windows and windshield. How close to a match is this mirror finish? View answer

Answer posted 3 years ago | Door Side Mirror | Silver Satin | 68-79 Bronco, 67-79 Ford Truck

Question 45

Is this housing American made? Do you feel it is stronger than the '76/'77 housing? View answer

Answer posted 3 years ago | Super 9 Ford 9-inch Housing | Large Bearing | 66-77 Ford Bronco

Question 46

I will us this to convert my 77 Bronco. With 15 wheels and 35/12.50 tires will they clear the wheels or will I need spacers? Thanks View answer

Answer posted 3 years ago | Power Steering Conversion Kit | Quick Ratio | 66-77 Ford Bronco

Question 47

What is the PSI and GPH the pump for this tank puts out? It will be used with the Edelbrock Pro-Flo 4 EFI for a 351W which requires a high pressure fuel system providing 43-45 or 58-60 psi of fuel pressure with a minimum flow rating of 57 GPH (215 liter/hr). View answer

Answer posted 3 years ago | M1A1 Stainless 23-gallon Fuel Tank + Skid Plate | 66-77 Ford Bronco

Question 48

I already have the tail light bezels...do you sell the headlight bezels separately? View answer

Answer posted 3 years ago | Billet Headlight Rings + Taillight Bezels Set | 66-77 Ford Bronco

Question 49

Does this replace the solid steel line from tank to pump. View answer

Answer posted 3 years ago | Stainless Fuel Hose Kit | Dual Tank w/Under Seat Switch | 66-77 Ford Bronco

Question 50

just curious as to whether this clutch kit will mesh up to a T-18 transmission or not ? View answer

Answer posted 3 years ago | Centerforce Clutch Kit | 11-inch | Ford 351M | 78-82 Bronco, 77-82 Ford Truck

Browse by Topic