Question 1

What type of minimal mods are you referring to? Should it fit fine with the factory power steering of a 73? Where is the input and output for the trans cooler located? Do you recommend pairing this with the flow kooler pump? I have a 351W. View answer

Asked 10 ´months ago | Ron Davis Aluminum Radiator | Auto Trans Cooler | SBF V8 | 66-77 Ford Bronco

Question 2

Is this a 30 spline View answer

Asked 10 ´months ago | Dana 44 Axles + Spicer 760X U-Joints | 4340 Chromoly | 66-77 Ford Bronco

Question 3

I have a 1966 Bronco with 6 knobs. Will these fit on a 66' and then just buy 1 extra or what would be best? (Flasher, Temp Control, Fan, Pull for heat, Choke, and Lights) View answer

Asked 10 ´months ago | Billet Dash Knobs | OE-Look, Black w/Silver, Set of 5 | 66-77 Bronco, 68-72 Ford Truck

Question 4

What psi does this pump put out? I have hydro boost brakes and am concerned. Also does this pump have a lower mounting location on the back of the pump? Most saginaws do, just confirming. Lastly, is this the same as your 2012a pump....the sag pump with dual returns and no pulley? This is going on a 1979 bronco with a 460. Thanks View answer

Asked 10 ´months ago | IDIDIT Direct Fit Tilt Column, Chrome, A/T Column Shift, 76-77 Bronco

Question 5

What should the torque setting be for the bolts? View answer

Asked 10 ´months ago | Fuel Tank Vent Hose | Main or Auxiliary | 66-76 Ford Bronco

Question 6

Will this kit work with the stock suspension , steering column and shaft my bronco is a all stock 72 View answer

Asked 10 ´months ago | Power Steering Conversion Kit | Quick Ratio | 66-77 Ford Bronco

Question 7

Could these work on a 93 Ford bronco for the rear seats? The seat belt would attach at the fiberglass top.. View answer

Asked 10 ´months ago | Black Inside Door Handle | LH Driver | 68-77 Bronco, 68-72 Ford Truck

Question 8

Looking at this adapter for the 4R70W and also the adapter for the 6R80. Do these adapters install form the outside of the trans or do you have to gut the trans and install the from the inside? View answer

Asked 10 ´months ago | Dana 20 Transfer Case Adapter | 27 Spline | AODE 4R70W 4R75W | 66-77 Ford Bronco

Question 9

I'm installing this pump and pump bracket #2032 on an 1989 Mustang GT. What is the pump relief pressure set at and how many gallons per minute does the pump flow? View answer

Asked 10 ´months ago | Aluminum Shrouded Electric Radiator Fan | High Output | 18.75 x 17.625 x 3

Question 10

do you have Quarter Window Chrome Molding Trim, passenger Side, 66-77 Ford Bronco? View answer

Asked 10 ´months ago | Quarter Window Chrome Moulding Trim | LH Driver | 66-77 Ford Bronco

Question 11

On the Wild horse emblem is there one left and one right side View answer

Asked 10 ´months ago | Chrome Sport Bucking Bronco Emblem | Adhesive Back | 3-in x 3.5-in

Question 12

Do the spindles come with bearings already installed? View answer

Asked 10 ´months ago | Expedition One > Spindle for Stock Disc Brakes | 76-79 Ford Bronco & F-150

Question 13

what are the small foam pieces ? View answer

Asked 10 ´months ago | Billet Window Crank Handles + Billet Knobs | PAIR | 68-79 Ford Bronco & Truck

Question 14

What bulb base do these have, or take? View answer

Asked 10 ´months ago | Front Turn Signal Assembly w/Clear Lens | 66-68 Ford Bronco

Question 15

Will these clips work with the Red FORD grille letters? View answer

Asked 10 ´months ago | Clip for Bronco Script Fender Emblem | SINGLE | 66-77 Ford Bronco

Question 16

does this come with the screws? View answer

Asked 10 ´months ago | Tailgate Latch Striker Post | SINGLE | 66-77 Bronco, 64-79 Ford Truck

Question 17

Does the dash pad cover for the 78 full size bronco come with an adhesive to install it? View answer

Asked 10 ´months ago | Black Dash Pad Cover | 78-79 Bronco, 73-79 Ford Truck

Question 18

What is the weight of 15x10 please? Thanks View answer

Asked 10 ´months ago | US Mags Indy Wheel | 15x10 | 5x5.5 Bolt Pattern

Question 19

I hav 1974 Ford f100 4x4 with 76 steering box do you have a kit that works for a 390ci engine View answer

Asked 10 ´months ago | Power Steering Pump | 351M 400M | 78-82 Bronco, 77-82 Ford Truck

Question 20

Can you use 5/8 bolts at all point of the rear spring installation? View answer

Asked 10 ´months ago | Early Bronco 1.5-inch Suspension Lift w/Bilstein 5100 Shocks | System 3

Question 21

If the front hubs are free/unlocked, does it matter which position is selected? Does the rear need to stay in the high position for normal 2WD driving? Thanks! Inherited this setup with no instructions. View answer

Asked 10 ´months ago | Dana 20 Twin Stick Transfer Case Shifter Kit | Stock J-Shift | 73-77 Ford Bronco

Question 22

Does this fit a group 24f battery? View answer

Asked 10 ´months ago | Battery Tray + Hold Down Clamp & Bolts | OE-Type | 66-77 Bronco, 65-66 Ford Truck

Question 23

can this be installed like a bed skin. on top of original baskets/braces and supports. or do you have to buy all new inner structure parts.?? View answer

Asked 10 ´months ago | Seamless Flared Quarter Panel | RH Passenger | 66-76 Ford Bronco

Question 24

Is this the cap for #9729 1973 auxiliary fill tube? View answer

Asked 10 ´months ago | Vented Gas Cap | OE-Type, Paintable, 3.25-in OD | 71-76 Bronco, 73-76 Ford Truck

Question 25

Can these be installed on fiberglass front fenders? View answer

Asked 10 ´months ago | WH Gorilla Warflares Fender Flares Kit | Front + Rear | 66-77 Ford Bronco

Question 26

Are these end connections compatible with standard -3 AN fittings? View answer

Asked 10 ´months ago | Glove Box Door Bumpers | PAIR | 66-77 Bronco, 63-67 Ford Truck

Question 27

Does this spring come with the screws to affix it to the license plate bracket? View answer

Asked 10 ´months ago | Rear License Plate Retainer Spring | Stainless | 66-77 Ford Bronco

Question 28

What is the total price for family roll bar for 1966 six point connection at the body? View answer

Asked 11 ´months ago | Steel Tilt Steering Column | Automatic Column Shifter, 2.25-inch OD | Universal

Question 29

What grade and gauge stainless steel is this made with? View answer

Asked 11 ´months ago | US Mags Indy Wheel | 15x7 | 5x5.5 Bolt Pattern

Question 30

do you carry the robertshaw 333-180 theromstat? View answer

Asked 11 ´months ago | Robert Shaw Thermostat | 180-degree | 66-86 Bronco, 48-79 Ford Truck

Question 31

IM INTERESTED IN THIS KIT, BUT WOULD LIKE TO UPGRADE SHOCKS TO FOX 2.5 OR BLISTEIN W RESERVOIR POSSIBLE? View answer

Asked 11 ´months ago | Early Bronco 3.5-inch Suspension Lift w/Bilstein 5100 Shocks | System 16

Question 32

I recently installed my fresh 302 engine in my 73 Bronco. I put the GM HEI distributor on... Noticed it will hit the hood, is this good going to clear it? View answer

Asked 11 ´months ago | Corbeau Seats > Highlander Fiberglass Hood | Deluxe | 66-77 Ford Bronco

Question 33

Does it have the the mounting holes for the stock mirror location View answer

Asked 11 ´months ago | Lower Door Shell | LH Driver | 66-67 Ford Bronco

Question 34

Will these actually lift a 79 Bronco 4? Or 2 to level the back to go with 4 coils like a lot of the kits do? And are they 2 1/2 or 3 wide? View answer

Asked 11 ´months ago | Leaf Springs Kit | 4-inch Lift | 78-79 Bronco, 73-79 Ford F150 4WD

Question 35

How does it attach? View answer

Asked 11 ´months ago | Liftgate Lower Seal | 66-68 Ford Bronco

Question 36

What is the length of the lokar pedal pad? View answer

Asked 11 ´months ago | Lokar Billet Aluminum Throttle Pedal Pad | 66-77 Bronco, 65-66 Ford Truck

Question 37

Is this for the drivers side small window that allows that small triangle window to pivot in the door? View answer

Asked 11 ´months ago | Vent Window Pivot Repair Pin | LH Driver | 66-77 Bronco, 61-66 Ford Truck

Question 38

Do you have this set in black? Can these be painted black? View answer

Asked 11 ´months ago | Billet Light Bezels | Headlight, Tail Light, Marker | 70-77 Ford Bronco

Question 39

What is the thickness of this tape? View answer

Asked 11 ´months ago | Window Glass Setting Tape | Does Both Doors | 66-89 Bronco, 48-89 Ford Truck

Question 40

Do these flares come with welting and screws? View answer

Asked 11 ´months ago | WH Gorilla Warflares Fender Flares | Rear ONLY | 66-77 Ford Bronco

Question 41

Can LED light cutouts be added as an option? View answer

Asked 11 ´months ago | Armor Plate Bumper | Front or Rear | 66-77 Ford Bronco

Question 42

I'm on add a leafs/blocks now. I've already drilled my perches to move my axle back 1. Do these full leafs move the rear axles back any? I could use another 1 View answer

Asked 11 ´months ago | ARB Compact Air Compressor

Question 43

I own a 1968 ford E-350, 460,C6, Quadravan w Dana 44 front axel. I need a new drag link and tie rod assembly. The long end of tie rod is 54 does your company have parts available for my application? View answer

Asked 11 ´months ago | Steering Tie Rod Kit with Adjustable Drag Link | 78-79 Ford Bronco & F150 4WD

Question 44

Does this kit come with the prothane grease for the bushings? View answer

Asked 11 ´months ago | Drop Pitman Arm | 78-79 Ford Bronco, 76-79 F150 4WD

Question 45

Can't see online fuses on the harness, does the harness require 2 inline fuses be installed? Thanks. View answer

Asked 11 ´months ago | H4 Headlight Conversion Kit w/Night Lighter Harness, 66-77 Ford Bronco

Question 46

Can the lights be dimmed? View answer

Asked 11 ´months ago | LED Dash Instrument Cluster Lights, 66-77 Ford Bronco

Question 47

It says not for suspension lift but it has an option for a suspension lift will it work with a 2-1/2 lift? View answer

Asked 11 ´months ago | ARB 4X4 > Bilstein 5100 Shocks for Stock Mounts | Set of 4 | 67-77 Ford Bronco

Question 48

I bought your extreme spindle bushings and before I mess them up. Do these work for chevy small bearing spindles? The id of the spindle is like 1 1/2 And the bushings are like 1 5/8. View answer

Asked 11 ´months ago | Extreme Dana 30/44 Spindle Bushings | PAIR | 66-79 Ford Bronco

Question 49

My Bronco did not come with the chrome. How will I know where to drill or mount the attachment hardware? View answer

Asked 11 ´months ago | Complete Molding Kit w/o Stock Tire Carrier Original Ford Tooling - Made in USA

Question 50

I have 31 spline axles, Will this ring & pinion 8619 YK fit those axles? Thank you View answer

Asked 11 ´months ago | Lokar Performance Products > Yukon Ford 9-inch Ring & Pinion | 3.50 Gear Ratio

Browse by Topic