Question 1

I recently installed my fresh 302 engine in my 73 Bronco. I put the GM HEI distributor on... Noticed it will hit the hood, is this good going to clear it? View answer

Asked 8 ´months ago | Corbeau Seats > Highlander Fiberglass Hood | Deluxe | 66-77 Ford Bronco

Question 2

Does it have the the mounting holes for the stock mirror location View answer

Asked 8 ´months ago | Lower Door Shell | LH Driver | 66-67 Ford Bronco

Question 3

Will these actually lift a 79 Bronco 4? Or 2 to level the back to go with 4 coils like a lot of the kits do? And are they 2 1/2 or 3 wide? View answer

Asked 8 ´months ago | Leaf Springs Kit | 4-inch Lift | 78-79 Bronco, 73-79 Ford F150 4WD

Question 4

How does it attach? View answer

Asked 8 ´months ago | Liftgate Lower Seal | 66-68 Ford Bronco

Question 5

What is the length of the lokar pedal pad? View answer

Asked 8 ´months ago | Lokar Billet Aluminum Throttle Pedal Pad | 66-77 Bronco, 65-66 Ford Truck

Question 6

Is this for the drivers side small window that allows that small triangle window to pivot in the door? View answer

Asked 8 ´months ago | Vent Window Pivot Repair Pin | LH Driver | 66-77 Bronco, 61-66 Ford Truck

Question 7

Do you have this set in black? Can these be painted black? View answer

Asked 8 ´months ago | Billet Light Bezels | Headlight, Tail Light, Marker | 70-77 Ford Bronco

Question 8

What is the thickness of this tape? View answer

Asked 8 ´months ago | Window Glass Setting Tape | Does Both Doors | 66-89 Bronco, 48-89 Ford Truck

Question 9

Do these flares come with welting and screws? View answer

Asked 8 ´months ago | WH Gorilla Warflares Fender Flares | Rear ONLY | 66-77 Ford Bronco

Question 10

Can LED light cutouts be added as an option? View answer

Asked 8 ´months ago | Armor Plate Bumper | Front or Rear | 66-77 Ford Bronco

Question 11

I'm on add a leafs/blocks now. I've already drilled my perches to move my axle back 1. Do these full leafs move the rear axles back any? I could use another 1 View answer

Asked 8 ´months ago | ARB Compact Air Compressor

Question 12

I own a 1968 ford E-350, 460,C6, Quadravan w Dana 44 front axel. I need a new drag link and tie rod assembly. The long end of tie rod is 54 does your company have parts available for my application? View answer

Asked 8 ´months ago | Steering Tie Rod Kit with Adjustable Drag Link | 78-79 Ford Bronco & F150 4WD

Question 13

Does this kit come with the prothane grease for the bushings? View answer

Asked 8 ´months ago | Drop Pitman Arm | 78-79 Ford Bronco, 76-79 F150 4WD

Question 14

Can't see online fuses on the harness, does the harness require 2 inline fuses be installed? Thanks. View answer

Asked 8 ´months ago | H4 Headlight Conversion Kit w/Night Lighter Harness, 66-77 Ford Bronco

Question 15

Can the lights be dimmed? View answer

Asked 8 ´months ago | LED Dash Instrument Cluster Lights, 66-77 Ford Bronco

Question 16

It says not for suspension lift but it has an option for a suspension lift will it work with a 2-1/2 lift? View answer

Asked 8 ´months ago | Bilstein 5100 Shocks for Stock Mounts | Set of 4 | 67-77 Ford Bronco

Question 17

I bought your extreme spindle bushings and before I mess them up. Do these work for chevy small bearing spindles? The id of the spindle is like 1 1/2 And the bushings are like 1 5/8. View answer

Asked 8 ´months ago | Extreme Dana 30/44 Spindle Bushings | PAIR | 66-79 Ford Bronco

Question 18

My Bronco did not come with the chrome. How will I know where to drill or mount the attachment hardware? View answer

Asked 8 ´months ago | Complete Molding Kit w/o Stock Tire Carrier Original Ford Tooling - Made in USA

Question 19

I have 31 spline axles, Will this ring & pinion 8619 YK fit those axles? Thank you View answer

Asked 8 ´months ago | Yukon Ford 9-inch Ring & Pinion | 3.50 Gear Ratio

Question 20

Do you need to buy a top channel for the windshield for this appllication? View answer

Asked 8 ´months ago | Wilwood GM D52 Dual Piston Calipers | Red, PAIR | 140-11290-R

Question 21

Can these be chromed? I have all the hinges and latches chromed on mine but would like to quiet the tailgate rattle. Thanks. View answer

Asked 8 ´months ago | The Silencer Tailgate Hinges | PAIR | 66-77 Bronco, 64-72 Ford Truck

Question 22

will these work on a 5in lift View answer

Asked 8 ´months ago | Double Line Clamp | 3/16-in & 3/8-in | Brake & Fuel Line Retainer

Question 23

How many microns is the filter rated for? View answer

Asked 8 ´months ago | EFI Fuel Lines | M1A1 Fuel Tank to Throttle Body | 66-77 Ford Bronco

Question 24

What is the physical difference between 66-67 doors or skins,? Is there any interchangeability? View answer

Asked 8 ´months ago | Lower Door Shell | RH Passenger | 66-67 Ford Bronco

Question 25

This is a street carburetor? Will it be okay on a Early Bronco everyday driver with mild off-roading and USFS roads? View answer

Asked 8 ´months ago | Holley Street Carburetor 2300 | 2 BBL, 500 CFM, Electric Choke

Question 26

Seeing how far off of the body that they come View answer

Asked 8 ´months ago | Silverback Wide Fender Flares | Front & Rear | 71-80 International Scout II

Question 27

What is the max length? View answer

Asked 8 ´months ago | Adjustable Steering Drag Link | 78-79 Bronco, 76-79 Ford F150 4WD

Question 28

How tall and wide are these letters? View answer

Asked 8 ´months ago | FORD Grille Letters | Chrome + OE Red Inserts | 67-77 Ford Bronco

Question 29

What size set xxxx is needed? These do not come with them and the ones from the original knobs are too large. View answer

Asked 8 ´months ago | Dash Instrument Knob | Flasher, Choke, Heater, Wiper | 68-77 Bronco, 68-72 Truck

Question 30

Do you have a weld in kit to add the family cage to my existing roll bar for this model. View answer

Asked 8 ´months ago | Baja Custom Roll Cage | 2.375 inch OD, Fully Welded | 66-77 Ford Bronco

Question 31

Can these be used as stand alone or do they need to also have the chrome trim pieces to work for lights? View answer

Asked 8 ´months ago | Paint Reseal Kit | 66-77 Ford Bronco

Question 32

Will this kit close the gap between the liftgate & tailgate on a '72? View answer

Asked 8 ´months ago | Liftgate & Tailgate Seal | 69-77 Ford Bronco

Question 33

I just stumbled across this Gear Banger kit. I have a 1978 Jeep CJ5 that the previous owner did a NP435 conversion in. I love the transmission, but hate the long throw of its shifter. Plus in granny or third gear the shifter is practically shoved to the dash. Would this application work for my CJ? Thanks, Danny View answer

Asked 8 ´months ago | Trail Edition Gear Banger NP435 Shifter | Complete Kit | 66-77 Ford Bronco

Question 34

Is that a ford Logo on the reflective piece? View answer

Asked 8 ´months ago | Passenger Red Rear Reflector, 70-77 Ford Bronco

Question 35

Will the work on the driver side with a clutch? Looks tight for fit View answer

Asked 9 ´months ago | AX15 Transmission Deluxe Kit (w/New Trans), T-Shift Dana 20, 66-72 Bronco

Question 36

I have a 66 bronco with a OE. air box driver side. Is there a top part to it or just a seal. View answer

Asked 9 ´months ago | Air Vent Top Seals | OEM Type, PAIR | 67-77 Ford Bronco

Question 37

can the stock wiper switch be used View answer

Asked 9 ´months ago | Electric Windshield Wiper Kit | Dual Motor | 66-77 Ford Bronco

Question 38

Can this be installed with the inboard shock hoop? Thanks. View answer

Asked 9 ´months ago | Fuel Tank Strap J-bolt | OE-Type | 66-77 Ford Bronco

Question 39

Looking for demensions of radio. Will this interfer with air box? View answer

Asked 9 ´months ago | RetroSound Huntington Direct-Fit Radio | AM/FM, Bluetooth | 66-77 Bronco, 61-66 Ford Truck

Question 40

With this setup, do I still use the 77 pitman arm or do I need to switch to a 75 and earlier pitman arm? View answer

Asked 9 ´months ago | Power Steering Conversion Kit | Quick Ratio | 66-77 Ford Bronco

Question 41

Will this kit work on a 4R75W transmission from a 2006 Ford F150? View answer

Asked 9 ´months ago | Dana 20 Transfer Case Adapter | 27 Spline | AODE 4R70W 4R75W | 66-77 Ford Bronco

Question 42

Do you sell the rear shocks? I see the separate spring kit but no shocks with it. Thanks View answer

Asked 9 ´months ago | Flex-Master 4-inch Lift Kit w/Bilstein 5100 Shocks | 78-79 Ford Bronco

Question 43

Do you have to cut out holes for the door handle cups and window crank? View answer

Asked 9 ´months ago | Yukon Locking Hubs | Dana 30/44, 19-spline | 66-92 Bronco, 73-93 Ford Truck

Question 44

Hello. these mirrors look like they are adjustable (able to tilt up/down, in/out). Am I correct? View answer

Asked 9 ´months ago | Door Side Mirror | Silver Satin | 68-79 Bronco, 67-79 Ford Truck

Question 45

Will this pan work on 96 explorer block. View answer

Asked 9 ´months ago | Engine Oil Pan Kit + Stainless Dip Stick & Tube | SBF 289 302 V8 | 66-77 Ford Bronco

Question 46

What is the rotor diameter? View answer

Asked 9 ´months ago | Disc Brake Hub + Rotor Assembly | OE or Disc Kit | 66-86 Bronco, 76-86 Ford Truck

Question 47

Are two breathers needed for front and rear differentials ? I mean one for each diff. Thanks DEL View answer

Asked 9 ´months ago | Axle Breather Bolt | Front or Rear Brake Hose Retainer | 66-79 Ford Bronco & Truck

Question 48

Will this work with the factory rack? View answer

Asked 9 ´months ago | BadAss Tents Side Mounting Accessory | Rotopax Bracket | 21-25 Ford Bronco

Question 49

Which port on this master cylinder is used for front brakes in which for rear? This is going on a disk/disk application. Thanks View answer

Asked 9 ´months ago | San Felipe Full Family Roll Bar Kit | Bare Steel | 66-77 Ford Bronco

Question 50

Do these fit all hardtop years, e.g. 66-77? View answer

Asked 9 ´months ago | Liftgate to Side Panel Drain Weatherstrip | PAIR | 69-77 Ford Bronco

Browse by Topic